Categories

Info


International
IST Sports Corp.
TEL: +886 2 2627 2516
FAX: +886 2 2659 9056
Website: www.istsports.com
E-mail: diving@istsports.com



USA
IST Diving System
TEL: +1 909 6229600
FAX: +1 909 6229220
Website: www.istsports.com
E-mail: info@istdivingsystem.com

R860

New flagship diaphragm regulator

More details

This latest regulator set from IST is not only feature-packed and capable of handling a high work load, it can also be used in both warm and cold water conditions.

CE mark  certified

 

 

R8 BALANCED DIAPHRAGM 1st STAGE

• It has a high-flow, fast-acting valve system that is capable of delivering large amount of breathing gas in an instant, irrespective breathing demand, cylinder pressure or depth. It has not only passed the stringent CE test but the performance is comparable with the best available.

 •  4 intermediate pressure ports (located in the swivel turret) and 2 high pressure ports.

 •  Available with YOKE or 300BAR DIN (G5/8) connector.

 •  Anti-freeze models are available Separately.

 

Inter. pressure setting @ 9.5~10.0 bar (137~145psi)

Ventilation rate @ 206 bar (3000psi): 3820L / min. (135 cu ft / min.)

 

 

O60 BALANCED 2nd STAGE

 •  The O60 second stage is equipped with a metal balancing tube and an adjustment knob. They are able to meet heavy breathing demand with ease and in extremely cold water they also act as heat sink to prevent icing.

 •  Ease of breathing is achieved by a purposely shaped housing interior, which is designed to create a pressure drop in the area just before the mouthpiece. This means air gets pulled towards the diver’s mouth directly after leaving the valve.

 •  The volume of air leaving the valve can be fine-tuned by the adjustment knob on the side of the O60 at any time so the diver can choose to to breathe conservatively, or to open the valve up for more air in physical demanding situations.

•  The pre-dive / dive switch next to the adjustment knob prevents the valve from freeflowing while on the surface.

 •  The second stage comes with our high-spec, large bore intermediate pressure hose (max. service pressure @ 34.5 BAR / 500psi) which flows sufficient breathing air even when the demand is heavy.

 

Cracking pressure setting @ 0.8 ~ 1.2 inch of water
Flow rate @ 206 bar (3000psi): 30+ cu ft / min
Max service intermediate pressure @ 10 bar (145psi)

News


We will attend DEMA show 2014 in LAS VEGAS, USA!
Our booth No.: 2640 in North Hall, LVCC
November 19-22, 2014

DEMA2014

2015 New Products release soon!!

Download

Download